Drillwell manufacture a wide range of Holding Equipment of which includes Safety Foot Clamps, Rigid Pipe Wrenches, Full Grip Wrenches (Wrap Around Type), Chain Wrenches, Casing Clamps, Spider Bowls and Slips in various sizes.

Drillwell Ltd - Rotary Drilling Equipment - Holding Equipment

Holding Equipment - Safety Foot Clamps

We manufacture a range of Safety Foot Clamps with replaceable heat treated jaws capable of accommodating from EW to HW Drill Rods and Casings sizes up to HW.

The design incorporates safety springs which absorb any shock caused by sudden closing of the clamp on the Drill Rod before it can damage the operators foot.

These clamps may also be hydraulically operated from the Drill hydraulics system by the means of an additional hydraulic conversion kit, please email or contact us for further information.

Safety Foot Clamps - Drillwell Ltd

Holding Equipment - Rigi Pipe Wrenches

These wrenches are supplied for general use in making and breaking threaded joints on Drill Rods and Casings. Sizes other than listed below are available, please email or
contact us for further information.

Rigid Pipe Wrenches - Drillwell Ltd

  Designation

Max Opening

Part No.

  18”

2 1/2”    63mm

DW 05700

  24”

3”    76mm

DW 05701

  36”

5”    127mm

DW 05702

  48”

6”    152mm

DW 05703

Holding Equipment - Full Grip Wrenches (Wrap Around Type)

A full range of full grip wrenches is available from Drillwell. They are specially designed for use with thin wall bits, inner and outer tubes, Wireline Rods and thin wall Casings. They should always be used with thin wall metric series of down the hole equipment. please email or contact us for further information.

Full Grip Wrenches Wrap Round Type - Drillwell Ltd

Holding Equipment - Casing Clamps

We design and manufacture a wide range of Holding Clamps for use with all sizes of Casings. They are normally used to suspend the Casing at ground level or at the Rig Table or centraliser level. Generally they are of fabricated construction and have the bore which grips the Casing, hard surfaced serrated or plain.
Please email or contact us for further information.

Casing Clamps - Drillwell Ltd

Holding Equipment - Spider Bowls and Slips

We design and manufacture a wide range of Spider Bowls and Slips of which are used to suspend the Casing in the borehole at ground level of the slips can be used to suspend Casing at the Rig Table or centraliser level.

The tapered bore spider bowl is fabricated from high quality steel and the serrated slip jaws are made from alloy steel and heat treated for strength and long life.
Please email or contact us for further information.

Spider Bowls & Slips - Drillwell Ltd

Below is our Holding Equipment range, if you require a bespoke design then please email or contact us.

Rotary Drilling Equipment - Holding Equipment Product Range

  • Holding Equipment - Safety Foot Clamps
  • Holding Equipment - Rigid Pipe Wrenches
  • Holding Equipment - Full Grip Wrenches (Wrap Around Type)
  • Holding Equipment - Chain Wrenches
  • Holding Equipment - Casing Clamps
  • Holding Equipment - Spider Bowls and Slips

Holding Equipment - Chain Wrenches

A full range of full Chain wrenches is available from Drillwell. They are specially designed for heavy use. please email or contact us for further information.

Sizes Available

2 1/2”, 4”, 6”, 8”, 10”, 12”

Chain Wrenches - Drillwell Ltd

DRILLWELL LTD

Comprehensive Drill Design and Supply Company

Drillwell Ltd
Unit 1-2, Rotherham Close
Killamarsh, Sheffield, S21 2JU
Tel No: 0114 2487333

Comprehensive Drill Design and Supply Company  - Drillwell Ltd
Drillwell Ltd
menubar - Drillwell Ltd

DRILL SUPPLY AND HIRE FOR MINING AND EXPLORATION
DRILL RODS | CASING | CORE BARRELS | DRILLING EQUIPMENT| SITE
INVESTIGATION EQUIPMENT | DRILL BITS | DRILLING RIGS AND PUMPS

menubar
menubar - Drillwell Ltd
We Accept Most Major Debit Cards & Credit Cards - Drillwell Ltd
We Accept Paypal - Drillwell Ltd

IF DRILLING IS YOUR GAME
"DRILLWELL” IS THE NAME